1 / 1
Stringing test with temperature change every 5 mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
From 220C to 180C
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 327
- Makes
- 2
- Views
- 947
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments.
It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C
The picture shows the results when filament is old (too much humidity also).
To slice and create own custom temp change, left click on layer height, then right click to add custom gcode. Use M104 S200, to set it to 200c