1 / 5
CreationSpace CS1901A CASE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the CreationSpace CS1901A
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the CreationSpace CS1901A
I printed in ABS using stock Bambu Lab settings.
I used using 4 walls and 30% gyroid infill and 4 top and bottom layers at 0.4mm layer height.
Latches require 35mm M3 bolts and screws.
Takes around 5 hours to print on the Bambu Labs X1C, (inserts in one colour and the main case and two latches on another)