1 / 7
PiKVM Zero Case for CSI-Bridge + OLED display + Power/USB-Splitter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small tidy case for a Raspberry Pi Zero and the needed parts for a PiKVM
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 77
- Makes
- 1
- Views
- 1,850
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Remixed the model of Nashuar, thanks for the base-design.
What I added/changed:
- mounting for the power/USB-splitter on the lid
- cutouts for the USB-ports of the splitter in the case
- cutout for a 0.91 inch (128x32) OLED display in the case
- a slim „bar“ on the lid to keep the OLED display in place
- bigger cutout for the microSD-card for easy access
- tiny cutouts on the upper side of the case for an easy removal of the lid
Used parts:
- Raspberry Pi Zero 2W
- HDMI-CSI Bridge
- USB/PWR-Splitter
- 0.91 inch OLED display
- some cables
Printinstructions:
Nothing special. No support needed, only for the mounting of the power/USB-splitter.
It’s one of my first projects, so don’t expect a perfect file. If you find something noticeable let me know.
And yes I know the one port on the power/USB-splitter isn’t really a HID-port but I named it so it has the same label as the port it plugs into on the Pi.