1 / 2
TPU Eryone & printer settings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU Eryone & printer settings
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 248
- Makes
- 0
- Views
- 1,501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
That's are my settings to print Eryone TPU with (or without) supports.
Be carefull: USE texured plate. Probably it's possible to use also smooth plane, but you have to use paper glue to avoid that the material cannot be detached.
Supports: If you need to print supports, set the gap between the layers in Z-axis to at least 0,3mm. Otherwise, it’s very difficult to remove all of the support material due to high adhesion between layers. (You can find this settings under 0,2mm quality TPU profile)
Obviously the stl file is only for info.
Settings for MK3S+