MK3S+ - Y-Rod holder for ISO4032 hex-nuts
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.58 – €1.93 net (excluding VAT)
For file: MK3S-YRodHolder-ISO4032_0.15mm_ASA_MK3S_1h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.76 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.9 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Y-Rod holder that uses ISO4032-hex nuts instead of the original square nuts
- Rating
- 4.75 / 5
- Likes
- 19
- Downloads
- 220
- Makes
- 4
- Views
- 986
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Because the originally used square nuts for the Y-rod holders can sometimes be hard to get, i made a version that uses the pretty common and easy to get ISO4032-hex nuts.
These are the standard nuts you get in pretty much every DIY market in Europe.
Like the original ones they could also be printed without support.
I recommend using ASA, because on such small parts with lots of retraction PETG creates a lot of stringing or blobs (at least in my case).