Heavy Duty Band Clamp Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.56 – €4.35 net (excluding VAT)
For file: Band clamp holder v2_0.2mm_PETG_MK3S_3h58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.96 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 3.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This band clamp holder was designed to mount 2 of my heavy MLCS Merle Camps to the wall in a convent to access way.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This band clamp rack can be used for more than just holding your clamps, but the specific use I built it for was mounting my Merle clamps from MLCS.
To mount it uses 4 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
It features 2-½ inches of clamp room between flared mount and flared end. It is 3-½ inches squared at wall with rounded corners. The shaft is 1-½ inches thick. It has a distance from the wall of 3-3/16 inches.
I made mine from Prusament PETG.