Prusament Spool Shelves
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.25 – €0.30 net (excluding VAT)
For file: Connectors_0.25mm_PLA_MINI_20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 20.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Recycle your Prusament Spools into a simple set of shelves to show off all of your prints.
- Rating
- 4.8 / 5
- Likes
- 118
- Downloads
- 217
- Makes
- 8
- Views
- 1,806
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have loads of Prusament Spools leftover and want to make something out of them, Try this set of shelves for displaying your prints.
The Leg connectors are for connecting two legs together or for the top shelf. The shelf connectors are for connecting the legs to the shelves.
Legs are fixed into the holes marked in red in the image below. A small drop of hot glue in the connector will secure the legs properly, but allow them to be removed in the future.
I have managed to make it with 3 shelves, with it being fairly stable. It may be possible to get it higher but I have not tested this.
Files to Print
Legs - 3x for the Bottom shelf, 6x for each additional Shelf
Shelf connectors - 3x for each Shelf (excluding the top one).
Leg connectors - 3x for connecting the legs together
Centre Plate - One for each shelf