singleextruder-multicolor "Procrastinators unite! ...tomorrow" plate

See the "Notes" part further below for instructions on how to print it.

I had the luck to be part on the "Mural" project of Joe from 3DMakerNoob (https://3dmakernoob.com/).

I was very late (i had still not send the part way after the given deadline) and saw this part of one of the unpacking videos: https://www.youtube.com/watch?v=bE99\_XKCepw&feature=youtu.be&t=1309

Before writting the letter and sending the part, i felt i ABSOLUTLY HAVE TO do this plate (with OnShape), which describes me perfectly.

EDIT: and this is Joes reaction to it <3... https://www.youtube.com/watch?v=AUI4g9NIKaE&feature=youtu.be&t=484

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Notes:

EDIT:

I added the file "procrastinators___0.2mm-layer-height___colorchanges_at_0.6_1.0_1.4-mm.stl" which is already scaled to be printed at 0.2 mm layer height, with 2 layers per color (this is how i printed it for 3DMN), with color changes at:

• yellow (layer 1 & 2)
• 0.6 mm: beige (layer 3 & 4)
• 1.0 mm: white (layer 5 & 6)

• 1.4 mm: red (layer 7 & 8) I designed the "colors-layers" 1 mm thick ("procrastinators.stl" file), but if (like me) you don't want to use that much filament and time, you can scale the model down on the z axis by the amount you want.
  I for example you want to print it with 0.2 mm layers and want to print 2 layers for each color, you have to scale it down to 40% on the z-axis.

  After slicing it, you can use Prusa Researches "Color-Print" tool (https://www.prusaprinters.org/color-print/) to switch the colors at the right heights.

Category: 2D Art