1 / 7
X56 and x55 comfort kit and VR helper — image 1
1 / 7

X56 and x55 comfort kit and VR helper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

X56 and x55 comfort kit and VR helper, I made this when I got a new X56 and found My hand was to low to reach the top…

Rating
5 / 5
Likes
10
Downloads
62
Makes
1
Views
553
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

X56 and x55 comfort kit and VR helper,

I made this when I got a new X56 and found My hand was to low to reach the top hat switch and the top button on the joystick, and

as you can't see the buttons in VR, I made this so I could identify what switches I was touching.

4 size hand raisers, low, mid, high, very-high, with cut out slope so you can still reach the pinky button.

I also found that the top button on joystick was a pain to get to as it was lower than the hat switch bottom left of it.

Also the top hat switch top right was also a pain, so made some raisers to bring them a bit higher, now I can reach the top hat switch and button easier.

The top right hat will clip on, but you may need to glue on, and I used uhu por glue as its easier to remove if needed.

There is also two C-clips for F and G that clip around the rotory switches with a notch sticking out so you can feel were the position of the switch is.

Category: Computer

Tags