Bonsai Fusion Support - Fusion Fat Bonsai Technique - Formal and Informal Categories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are supports to produce Bonsai with the Fusion Technique. Several saplings arranged with this supports.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 44
- Makes
- 1
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Oh you little grasshoppers, you think that because you 3D print you have mastered the skill of patience ? Try again, dive deep into the art of bonsai and start your journey into this must have secret skill.
The Fusion Technique to generate bonsai very fast (5 years or less:) uses saplings planted circularly on the ground and supported with ties to a mesh. These 3D printed supports replace that mesh and can be printed with biodegradable materials such as PLA so that there is no need to remove the support.
The two 3D printable files are as follows:
- Formal Bonsai Fusion Support: Use this support to produce a formal bonsai with symmetry in mind. The size is 8" height, 8" front, 5" depth (may be resized in the slicer).
- Informal Bonsai Fusion Support (in photos): Informal bonsai have a flow pleasing to the eye and are favorite among many bonsai enthusiasts.
3D Printing:
- With a 0.4mm nozzle, choose 0.32 mm layer height to speedup your print. This is a purely functional print that your beautiful bonsai will hopefully completely cover.
- The overhangs look good with no supports (some little defects end up hidden in the inside).
- I needed brims when printing PLA on a PEI build plate.
- Select 6+ walls as this will ensure the model is completely filled.
- The tests were printed in PLA, which is biodegradable, but I have not had time to test the durability with the saplings and the growing conditions (spring semi-shade initially and full sun afterwards). It is possible that some other more durable plastic is a better option.
- PETG should also work fine for printing as the structure is pretty sturdy. These supports in PETG should be printed pretty slow to prevent.
Steps for Fusion Bonsai:
- Plant during the active growing season (typically spring).
- In a growing pot, place bonsai /growing soil appropriate for your plant.
- Place the supports (either formal or informal)
- Plant several saplings of the same species around the support.
- Tie the saplings to the structure. A helical tie-up of the saplings as they go up may result in better fusion.
- There are several fusion bonsai tutorials, searching images for them will yield several cool sites with multi-year photos of the process.
