1 / 2
Parametric Timing Belt Pulley
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.51 – €0.62 net (excluding VAT)
For file: Timing-Belt-Pulley-Example_0.2mm_PETG_MINI_41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 40.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Parametric printable timing belt pulley (using FreeCAD)
- Rating
- 0 / 5
- Likes
- 90
- Downloads
- 771
- Makes
- 2
- Views
- 2,838
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Customizable Parameters:
- Tooth Profile (GT2, HTD 3M, HTD 5M)
- Tooth Count
- Tooth Width (Belt Width)
- Bore Size
- Snap-Ring Size
- Grub Screw Size
What you need to know:
- Printed in two parts.
- A metric snap ring/retaining ring (DIN 471) is required for assembly.
- The hole for the grub screw is intended to be threaded using a metric thread cutter.
Step-by-Step Instructions:
- Download Timing-Belt-Pulley.FCStd.
- Select the TimingGear and in the base section, edit the
- height (Tooth Width/Belt Width)
- teeth (Tooth Count)
- type (Tooth Profile)
- Select the Parameters spreadsheet and edit the
- Bore Diameter (don't forget a tolerance addition to make it fit! 0.2 seems to be a good value on my printer)
- Snapring Size (the nominal size of the snap ring you want to use)
- Total Height (total height of the pulley)
- Grub Screw Metric Size (the metric thread of your grub screw)
- Grub Screw Placement (if necessary, height where the grub screw should be placed)
- Guard Height & Guard Thickness (if you want to customize the guard on both sides of the teeth)
- Export Pulley-Part1 and Pulley-Part2 and print! Don't forget to check the print orientation of Pulley-Part2!