1 / 5
Microphone Anti Shock Mount (MASM)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Microphone Anti Shock Mount (MASM) for the HyperX SoloCast.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 1
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my Microphone Anti Shock Mount (MASM) for the HyperX SoloCast.
the threads are 5/8'' for the Microphone side.
I lust left a 7mm hole in the Top Part and cutted the 3/8" thread later with a soldering iron insert.
I also added a version with a 5/8" thread in the Top part of the Mount.
The two parts Print with Supports, just make sure to set the support angle to 75% otherwise you will get supports over the threads which are a total mess so clean up!
In addition, you need two or 4 Rubber bands or (which I use) Hair ties.