Helicopter blade/pitch linkage spoons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a customizable linkage spoon model, originally designed for the Align Trex 700E.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 80
- Makes
- 1
- Views
- 356
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is a customizable linkage spoon model, originally designed for the Align Trex 700E.
Ball 5.1mm thread 2mm is for a swashplate link, thread 3mm is for a blade link.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%?
Filament: Any PolyAmide 12 (Like BFNylon) or 6
Notes:
Defaults and the STLs provided are designed for 0.4mm line width and 0.4mm nozzle, adjust bspoon_linkage_th if necessary. It's best to use 0.05mm layer height, but 0.1 should suffice.
If you're printing polyamide without heated (or any) chamber, use 0.05mm layer height, a wide brim, no more than 40mm/s for perimeters, and print 6+ spoons at once, so the nozzle does not stay above a single part for too long.