Asko dishwasher handle part
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.93 – €2.36 net (excluding VAT)
For file: DishwasherHandle Asko D5624_0.2mm_ASA_MK3S_1h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.14 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.71 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replaces the plastic backing part to the handle cover on an Asko D5624 dishwasher. Original Part #8084025
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 68
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a replacement backing to the “HANDLE LID FOR DECOR PLATE” part on an Asko D5624 dishwasher. It appears to be used on other D5xxx models as well.
The original part number is 8084025 and is a single piece of ABS plastic. You can find it in the attached parts catalog under #624.
My replacement is built to use a .3mm x 3mm x 10mm compression spring, so that it can easily be inserted from the front of the otherwise completely assembled dishwasher (I purchased these springs - Amazon link). The spring goes inside the opening at the bottom of the model and then the cylindrical pin can be inserted, compressed and the handle cover installed. In a pinch, a section of 3mm bamboo skewer can be used, if the printed pin is too tight of a fit. I had mixed success with the printed pin.