Litter Transfer Device
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.76 – €11.93 net (excluding VAT)
For file: LitterTransferDevice-V2_0.6n_0.25mm_PLA_MK4IS_6h37m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.84 excluding VAT (range midpoint).
- Weight reported by the author
- 224 g
- Print time reported by the author
- 6.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A bin/container to transfer fresh litter from the bag/box to your cat's litter box. Reduces the likelihood of spills.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you tired of struggling with a large bag or box of litter when it's time to top up your cat's litter box with fresh litter, inevitably spilling litter everywhere and having the majority of it end up everywhere BUT inside the cat box? Well, struggle no more! Use the Litter Transfer Device (LTD) to easily transfer fresh litter from the original container to your cat's litter box! No more mess! Just fresh litter in the box, where it belongs.
Version 2 has a full-width spout which makes pouring the litter out more controlled/less likely to spill over the sides. It also provides a wider area for the last bits of litter to be caught when stopping the pour after filling the LTD.
Print Recommendations:
- PLA
- 3 perimeters
- Print upright with supports on the underside of the bin in the area of the finger groove.*
*I found it easiest to paint-on the supports using the “smart fill” option with the angle set to 2°. Make sure you cover at least the area shown, circled in the screenshot above.
Change Log:
- 17JUL2025: Version 2 release; updated model and print files, description, and images.