1 / 2
Nirvana 'With the Lights Out' cover - Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 filament Hueforge print. AMS not required, but makes it much easier.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 53
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
JAYO Black Transmission Distance: 0.3
JAYO Gray Transmission Distance: 2.5
PLA PolyLite Natural Transmission Distance: 21
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #10 (0.88mm) swap to Natural for the rest.