Ryobi Deep Well Impact Socket Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ryobi Deep Well Impact Socket Storage in the shape of a battery, clips on for loss prevention.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Since I would most definitely loose these sockets about 12-15 minutes after purchase I needed somewhere to store them, and what better place than underneath the tool that uses them. So this piece fits on to the great Ryobi 18v Toolholder by Super7 and clips on to my impact driver.
There are 2 versions, one for M4 threaded inserts and one for M4 hex nuts. I use the threaded inserts from CNC Kitchen and the hole is sized accordingly.
There are a number of holes for 6x2mm magnets that can be glued in, but I only put in 1 for good measure since the sockets stay in place so far. If they start wearing down the plastic I can add more magnets.
Link to the battery clip part from Super7:
https://www.printables.com/model/236613-ryobi-18v-toolholder