1 / 1
Mini Indoor Glider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses under 5 grams of filament
- Rating
- 4.5 / 5
- Likes
- 100
- Downloads
- 1,276
- Makes
- 4
- Views
- 5,177
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from just above the wing, and throw lightly.
Infill-15%
First layer height-0.15mm
Layer height-0.2mm
Nozzle diameter-0.4mm
Brim-Disabled
Supports-Disabled