Replacement Clip for iKross Air Vent Phone Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vent clip for my iKross Cradle broke! So I modeled a replacement.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A vent clip for my iKross Cradle broke!
So I modeled a replacement.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
How I Designed This
Calipers and Feeler Gauge
First step was taking lots of measurements.
I used my calipers for everything but the gap at the far end of the clip. For that I used my feeler gauge.
OpenSCAD
I then translated the measurements into parts in OpenSCAD.
I modelled the clip itself with a polyvertex that I then subtracted out the gap and the beveling.
The top bevel was the hardest. I took a cube and cut out the bevels. This shape I then used to cut out the bevel.
Category: Mobile Phone
