Craft board organization for Ikea Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.20 net (excluding VAT)
For file: TriangleEndcap_0.4n_0.2mm_PLA_MK3S_15m_ApproxCost0.04.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a collection of holders and hooks for the Ikea Skadis board that are helpful for organizing crafting supplies.
- Rating
- 0 / 5
- Likes
- 53
- Downloads
- 59
- Makes
- 0
- Views
- 953
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For her birthday, I wanted to make my mom a board to help organize a shelf she uses for random craft supplies. I decided on using lightweight dowels to make shelves that can stretch across holders. This way, all that is needed is to cut a dowel to the needed length. For this project, I used 1/4 inch diameter dowels. So the holes in the printed holders will accommodate up to this size. The holders also have a tiny hook at the bottom because I felt there was no use wasting that usable space. I found that the hook actually gives the holder a dual purpose. It is very convenient to place lightweight packages that can fit on hooks used at stores.
I created a few different variations of the holders. One variation was creating holders that had either four or six slots for the dowels. Another variation was having the top of the slots open or closed. The last variation was having the holders have hooks at the base or not.
I have also made endcaps for the dowels. This prevents the dowels from having any possibility of slipping out of the holders. Because dowels tend to have slightly varying thicknesses, I sometimes had to press and twist the endcap on the dowel to put it on. I had poplar dowels, which easily conformed to fit the dowel since it is a relatively soft wood. I didn't want to make the endcaps any bigger because I would prefer them to be securely on there rather than loose.
I also created two sets of hooks for the ribbons she had that were significantly taller than the rest. While they would've fit on the dowel shelves, I would've had to place them horizontally, where they would've taken up much more space on the board. One hook measures 55 mm from the base of the hook and the other one measures 120 mm.
- If I find that we need other hooks after the board has been in use for a while, I also have another set of models, Bracket and shelf collection for Skadis (over 200 files so far), that I can also use.
- Designed by Eva Lilja Lowenhielm, Inter Ikea Systems BV holds the patent to the Skadis board. All rights to this model belong to them.