Tiki Drinking Monkey
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The life of the party! This is a 200 x 200 wall mounted tile inspired by a my home bar, The Little Monkey Tiki Bar.
- Rating
- 4.667 / 5
- Likes
- 30
- Downloads
- 110
- Makes
- 4
- Views
- 643
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an art tile I made for the wall of my tiki bar. It shows my spirit animal enjoying a stiff drink. Longer print time but few filament changes.
I've also found that using a dark blue/purple instead of black will give a nice effect with this print.
----------------------------------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Gray
PLA Metallic Gold
PLA White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #14 (1.2mm) swap to Metallic Gold
At layer #17 (1.44mm) swap to White for the rest.