Microphone Stand Desktop Adapter - Grommet & Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need a desktop microphone? Already own a microphone stand with a boom? If so, then print these objects to turn an…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 119
- Makes
- 0
- Views
- 1,547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Need a desktop microphone? Already own a microphone stand with a boom?
If so, then print these objects to turn an ordinary microphone stand into a desk mount. Microphone stand can be easily removed and placed back into the desk making this solution semi-permanent.
This solution requires:
- A microphone stand that with a pole that is less than or equal to 22.5 mm in diameter (hole is 23 mm).
- A 1.5 inch (38.1 mm) hole saw that is capable of cutting through the material of desk.
Desktop must be no thicker than 38 mm. Note that STL files have the threads going most of the way up to the top of the grommet. The photos have the threads going about half way. I extended the threads in the final model to fit thinner desks than mine.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2 mm
Infill:
20%
Filament:
[
Hatchbox PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA&tag=tvad0304-20) Black Post-Printing
Installation
- Using a 1.5 inch hole-saw, drill a hole in the desk. Remove boom from microphone stand and set aside. Disassemble height adjustment nut from stand by screwing it counter-clockwise unit it lifts away from stand. Set aside height adjustment nut and pole. Place the 3D printed nut on rest of stand. Feed stand through the bottom of the hole that was drilled into the desk. Slide grommet on the top of the microphone stand and slide through hole. Screw nut on bottom of grommet and tighten. Reassemble mic stand.
Category: Audio