1 / 2
Kangaroos (Macropus Rufus) - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The red kangaroo Macropus rufus illustrated by Charles Dessalines D Orbigny
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The red kangaroo Macropus rufus illustrated by Charles Dessalines D Orbigny.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Sunlu Brown Transmission Distance: 1.8
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #13 (1.12mm) swap to Brown
- At layer #17 (1.44mm) swap to Coffee
- At layer #21 (1.76mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.