1 / 2
Geralt and Yennefer (The Witcher) - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Never Lost, Always Found. Geralt of Rivia and Yennefer of Vengerberg.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 42
- Makes
- 1
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Never Lost, Always Found.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Overture Black Matte Transmission Distance: 3
- PLA+ Sunlu Grey Transmission Distance: 2
- PLA META Sunlu Red Transmission Distance: 4
- PLA Overture Cream Transmission Distance: 3
- PLA Sunlu Beige Transmission Distance: 8
- PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
- Start with Black Matte
- At layer #12 (1.04mm) swap to Grey
- At layer #16 (1.36mm) swap to Red
- At layer #17 (1.44mm) swap to Cream
- At layer #18 (1.52mm) swap to Beige
- At layer #24 (2mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
*If you are using a single AMS, you can do more than 4 colour changes by swapping out a spool that has been completed printing with another, for as many times as you want.