1 / 3
Fully parametric plant support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for plants around a circular base. Fully parametric (see the attached scad file), to print any size.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 70
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Support for plants around a circular base. Fully parametric (see the attached scad file), to print any size. Print upside down, no support needed whatsoever.
Scad file parameters:
| Parameter | Description | Default value | Unit |
|---|---|---|---|
inner_diameter | Diameter between the feet - if your plant has some sort of circular base you want to put this support around of, this is the value you're after. This is also what defines the main diameter. | 56 | mm |
hole_diameter | Diameter of the hole for the plant. Be mindful that depending on the angles below, the opening will most likely be smaller than that. | 5 | mm |
ring_width | Width of the outer ring. | 11 | mm |
supports | Number of supports. Less supports will mean a larger opening to the centre hole, as the angle of the opening is the angle between two supports. | 5 | n/a |
support_angle | Angle each support occupies. Larger angle means larger supports. | 15 | Degrees |
support_height | Height of the supports | 30 | mm |