Dell Charger Box for TableClip System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have a power supply that always gets in your way on the table? Clip it from the side!
- Rating
- 4.5 / 5
- Likes
- 16
- Downloads
- 51
- Makes
- 1
- Views
- 635
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Module for the TableClip system: https://www.prusaprinters.org/cs/prints/57023-modular-tableclip-system-with-sources
Does a notebook charger always gets in your way on the table? Clip it from the side!
If you have notebook charger from Dell (and possibly other manufacturers with similar shape), then this box will be perfect for you (rough charger dimensions: 22x142x65mm).
You can also design your own modules with the available sources.
Link to the base module: https://www.prusaprinters.org/cs/prints/57023-modular-tableclip-system-with-sources
Link to the sources: https://github.com/MikiGrit/table_clip
Print instructions
Print one base module from the original TableClip print of your choice (base_*.stl), two screws and module in this print.
Printable without supports. Tested with 0.2mm layer.