1 / 2
Carriage to allow Z Axis on Laser Cutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Will allow up to 37mm Z Axis travel for a laser engraver, printed in ABS 0.2mm.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Will allow up to 37mm Z Axis travel for a laser engraver, printed in ABS 0.2mm.
Print instructions
BOM:
1 x NEMA 11 Stepper motor
2 X 6mm Diameter x 100mm SS guide rods
4 x LM6UU 6mm Linear Ball Bearing
GT2 Timing Belt and 1pcs GT2 Timing Pulley 16T
1 X limit switch
For X axis it uses a round NEMA 14 Stepper
Note: Limitation - without power to Z stepper motor, the Z carriage will drop - you have to adjust Laserweb to keep the Z axis energised & adjust current on stepper driver accordingly