Remington 870 shock absorbing, weighted recoil pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shock absorbing recoil pad for the Remington 870 that can be weighted with lead tape to further reduce recoil.
- Rating
- 0 / 5
- Likes
- 86
- Downloads
- 524
- Makes
- 0
- Views
- 2,981
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original solid rubber recoil pad on the Remington 870 does somewhat reduce recoil simply because of its weight. It is, however, hard as a rock, and only gets harder as the rubber ages. This shock absorbing recoil pad for Remington 870 shotgun (wood stock) maintains the weight of the original recoil pad, but also flexes significantly to greatly reduce felt recoil. The dimensions exactly match the original Remington solid rubber recoil pad so the pull length won't change with the new recoil pad. When the rectangular hollow sections of the mounting plate are filled with lead tape, the weight also exactly matches the original solid rubber pad.
The mounting plate should be printed in PLA with 100% infill. Steel washers are placed in the circular hollow sections, and provide a solid mounting surface and prevent the recoil pad mounting screws from tearing through the plastic base plate.
The upper portion of the recoil pad needs to be printed in very soft TPU. I used NinjaFlex (85A shore hardness). The run of the mill 95A shore hardness TPU is too hard and will result in a recoil pad that doesn't flex.
After the mounting plate is filled with lead, and the steel washers are inserted, the recoil pad needs to be permanently glued to the base with a flexible epoxy or similar adhesive.