1 / 1
Ship Cleat or Dock Cleat
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple cleat for model ships. Please be aware that you will need scaling in the slicer!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This cleat is meant to be printed scaled down to about 20-25%. (For scaling reference: the full size is 10cm width for the top part (center of each end-round/circle). Please make sure that you print the “puncture” plate with the same scaling!
To find the correct bore locations, the plate has registration cutouts for alignment and has two pins that can be pressed into wood to help position the drill.