1 / 3
Magnetic Espresso Portafilter Funnel (VST Basket, 85mm) — image 1
1 / 3

Magnetic Espresso Portafilter Funnel (VST Basket, 85mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Yet another portafilter funnel. There's many funnels like this, but this one is mine!

Rating
0 / 5
Likes
4
Downloads
37
Makes
0
Views
498
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Yet another portafilter funnel. There's many funnels like this, but this one is mine!

Intro

A little funnel which attaches magnetically to a portafilter. Mostly designed to guide grounds into portafilter when attached to grinder, but should also be fine for manual puck prep, eg. WDT.

Designed to fit my Rancilio portafilter with a 18g VST basket. Doesn't make contact with anything but the top of the basket, so should fit most ‘standard’ espresso portafilters, regardless of lug position, etc.

Uses 5x3mm neodymium magnets. Can fit up to 12 of them, but 4 is enough.

The funnel has a small outer diameter which means that it should fit most grinders which have portafilter hooks (tested with my DF64).

Print settings

Printed mine in Prusament PC-CF blend, 0.4 nozzle, 0.2 layer height. Should be fine with a 0.6 nozzle and 0.3 layer height, too.

Should print without supports if printed upside-down. Use a brim if it detaches during printing.

The usual warnings about filament/3d printing food safety apply. Don't use this if you have too many microplastics in your diet already, etc.

Credits

Design language inspired by https://www.printables.com/model/465968-magnetic-portafilter-funnel - otherwise an original design.

Tags