1 / 1
Birdbuddy Pole Mount (60mm + 45mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screwable 60mm and 45mmPole mount for the original screwing points on Birdbuddy House
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I thought the original pole mount for the Birdbuddy was too thin.
Therefore, I created a direct mount bracket for 60mm poles that can be screwed to the original screw holes on the Birdbuddy house and then placed on a 60mm pole and screwed in place.
Added a adapter to slide over a 45mm Pole to fit the 60mm pole mount.
Printed in 0.2 mm layer height with 10-20% infill PLA+ or PETG.
Printable upside down without support on Bambulab P1P.