SinCity - Marv - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Marv ze SinCity - technikou HueForge - 4x filament AURAPOL (nebo libovolný jiný)
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 56
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Marv ze SinCity - technikou HueForge - filament AURAPOL
tisknuto na BambuLAb X1-C + AMS
4 filamenty
filament "PLA AURAPOL Natural_transp Transmission Distance: 29" je pouzžt 2x - jednou na zjemněni černé a podruhé na zjemnění šedé
tryska 0,4 - rychlosti “standart PLA”
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
PLA AURAPOL BLACK Transmission Distance: 0.3
PLA AURAPOL Natural_transp Transmission Distance: 29
PLA AURAPOL GREY Transmission Distance: 1
PLA AURAPOL Natural_transp Transmission Distance: 29
PLA AURAPOL WHITE Transmission Distance: 3
Swap Instructions:
Start with BLACK
At layer #14 (0.72mm) swap to Natural_transp
At layer #28 (1.28mm) swap to GREY
At layer #30 (1.36mm) swap to Natural_transp
At layer #38 (1.68mm) swap to WHITE for the rest.
Ať slouží….
Borek.