Filament Sensor Lever improved with longer reach- Fixes false filament runout alert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Prusa filament sensor lever can be quite fickle. This model is oversized so it can be easily sanded down to suit.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 97
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is an oversized version of the original filament sensor lever. It allows you to trim itback as needed to get it to work perfectly for your printers tolerances.
The following video shows how the sensor works and I used this design mod to fix a false fliament run out alert.
The file fs-lever-mod-Xtra_long is oversized and can be sanded or trimmed down to suit your particular machine's nuances.
The other one, fs-lever-mod_long is roughly what I ended up with in the video.
Use PETG as reccomended by PRUSA. I used a 0.6mm nozzle simply because it was on my machine. A 0.4mm would be just fine.