1 / 2
Plant Plant Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using standard M12 rod stand your plants up in 1 space with classy leaf designs!
- Rating
- 0 / 5
- Likes
- 69
- Downloads
- 74
- Makes
- 0
- Views
- 5,766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Have your very own multi-species tree in the house! I always run out of space for all the plants…. so I've designed the “plant plant stand”. It is intended to be used with M12 for the time being. The design features a slight lip around each leaf to contain any overspills from when you water them just a bit too much!
Source Files
Fusion 360 design files included to modify it for a metal rod diameter of your choice or make further changes!
Future Plans
- Revise the models to not require additional hardware and slot into each other (watch this space!).
- I also plan to add water drainage using the channels in the leaf trickling down to the bottom.
Print Settings
- Any Layer Height however I would advise high layer height, infill around 15% should be adequate.
- Recommended - Cylinder modifier with higher infill on the bolting part.
