Voron Magnetic Dust Filter Fan Grills
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetically removable fan grills with dust filtering for Voron (or anything else with a 60mm fan!)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 1
- Views
- 516
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a magnetic fan grill with a dust filter to prevent buildup of dust in the electronics compartment of Voron printers (or anything else). The magnets make these very maintenance friendly; when too much dust has accumulated on the mesh, just remove it and rinse it off!
Use M3 bolts for your fans. Note: Not all bolts are created equal. Some are magnetic, some aren't. Make sure yours are.
Use 6x3 circular magnets, superglue them in. Check polarity!
The dust filter mesh I used can be found here: https://www.amazon.com/dp/B0BHSS55RM?psc=1&ref=ppx_yo2ov_dt_b_product_details
Cut the mesh to size with regular scissors and use superglue to stick the mesh to the print.