Properly Spaced TronXY (X1) Y-Axis Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original acrylic piece that mine came with was cut incorrectly and resulted in very wobbly movement.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The original acrylic piece that mine came with was cut incorrectly and resulted in very wobbly movement, which meant the printer couldn't print at all. After seeing how many people had a similar issue I decided to just remodel it and replace it entirely with a 3D printed version.
For those of you having a similar issue on the z-axis, unfortunately it's not as easily fixed with a 3D printed replacement. I recommend wrapping your idlers with large heat shrink tubing intended for battery terminals. Electrical tape as a spacer will not work, there cannot be any seam whatsoever. One layer on each idler worked well for me.
Here's what I used. http://www.homedepot.com/p/Heat-Shrink-4-in-Battery-Cable-Identification-Black-Red-4-Pack-HST-ASTBR/205881679
Category: 3D Printer Parts