Spinner for 608 bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple spinner. 85mm diameter. 2 files to be printed: the spinner body and 2x caps
- Rating
- 4.667 / 5
- Likes
- 30
- Downloads
- 444
- Makes
- 3
- Views
- 1,716
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hardware required: 4 bearings 608 (Dext = 22mm;Dint = 8mm; h = 7mm).
Layer height 0.2mm. Printing speed 50 mm/s. The caps and the bearings fit perfectly in each hole. However, you may need to scale the models a bit under 100%, specially the caps, depending on your printer's accuracy. If it's good, you shouldn't have any problem.
Once printed, introduce the bearings in the big holes holes (there are 4), introduce the caps in the center bearing hole (upwards and downwards), make it spin and enjoy!
You can lubricate it to make the spinner to spin much more.