1 / 2
Pencil holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pencil holder with a different design, with walls full of holes.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 84
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend to print it a bit slowly (around 40mm/s) and to use Z hop when retracted to avoid collisions since the walls can be a bit sensitive while printing.
I used 0.3mm resolution and it was fine.
The printing takes time, so be patient!
Retraction settings must be very well adjusted.