Speaker Magnetic Connector Plug / Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.30 – €0.37 net (excluding VAT)
For file: Magnetic Plug_0.4n_0.2mm_PETG_MK4_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 27 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic connector and coupler to simplify speaker wiring
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 33
- Makes
- 0
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I've created a magnetic connector and coupler to simplify speaker wiring.
Printing:
- The plug is designed in two parts (split in PrusaSlicer)
- Easy2Print, 0,2mm PETG without supports
- Coupler
- Easy2Print 0,2mm PETG with supports from base plate only
Assembling/Materials:
- Plug:
- 1x M2x6 Screw
- 1x M3 Hex Nut
- 2x Magnetic Pogo Pin Connector (10mm diameter)
(one pin and one target for protection against polarity reversal)
- Coupler
- 2x Magnetic Pogo Pin Connector (10mm diameter)
(one pin and one target for protection against polarity reversal) - Make sure to glue the magnetic connector at the specific position.
- 2x Magnetic Pogo Pin Connector (10mm diameter)
Used magnetic connectors: https://de.aliexpress.com/item/1005003642741412.html?spm=a2g0o.order_list.order_list_main.5.26575c5ffLtiSg&gatewayAdapt=glo2deu