Case (Pi4 + CTP40)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case for the Raspberry Pi 4 with the screen from Fysetc CTP40 (4") directly attached. (To run Octoprint)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Case prints without supports, I used PETG with 3 perimeters (0.6mm nozzle) for mine.
The holes for all the plugs are left intentionally as very big opening to help air flow through the case to stop the pi from overheating.
The Screen from AliExpress comes with the distance holders and used screws included.
Please note that for me the screen rotation after installing the drivers as described by the vendor did not work:
https://github.com/FYSETC/FYSETC-CTP40
But the instructions in this link did work nicely to both rotate the display and the touchscreen:
https://www.instructables.com/Rotate-Raspberry-Pi-Display-and-Touchscreen/
(I used the Rotate 270°, for landscape with the USB C coming from the top)