Laser Pecker 1 Pro Burner Adjustable Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable height stand for Laser Pecker 1 Pro burner
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 188
- Makes
- 0
- Views
- 728
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Laser Pecker 1 Pro Burner Adjustable Stand
Adjustable height from lowest suggested distance (200mm) through the largest print bed size I could print.
Upper and Lower Arms will need to be glued together. Ensure smooth burr free surfaces first.
Even though the Laser Pecker 1 Pro is not supposed to burn plastic, I would not burn directly onto the base plate.
Suggest using small clamps or weights to affix smaller materials to the base that tend to shrink when burned i.e. leather.
Remixes Encouraged!
Print Parts
Base - nothing special but may consider adding a solid bottom where the arm meets the flat surface
Support - consider adding a high infill % at the cable stay… ask me how I know!
Lower Arm - suggest internal supports
Upper Arm - Add supports as needed
Screw - nothing special, needed to tighten the support to the arm for adjustability
Model NOT included - camera tripod mount screw