Machinist Jack (Parametric Files Included)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basically a long screw with a long nut that can act as a support for many objects. Both smooth and knurled included!
- Rating
- 4.897 / 5
- Likes
- 396
- Downloads
- 4,884
- Makes
- 43
- Views
- 14,314
- Reviews
- 39
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Basically this is a long screw and nut that can be used to support pretty much whatever needs supporting. In my case I made this to support my GPU since I noticed some deformation in the PCB from sag. These jacks use a metric trapezoidal thread similar to acme except metric. As a result of this I do recommend using lower layer heights for a smoother screw.
Compressed length of the model is 60mm. For full extension I'd recommend at least 2-3 threads engaged so that eats about 7mm leaving a max length of roughly 95.5mm.
I've included the CAD files so it can be edited. It should be completely parametric.
For printing I'd recommend the following settings:
- PLA is fine for most cases except where temperature is higher. For those cases I'd recommend PETG, ASA, or ABS. Ultimately choose what works best for you. I used PETG. Flexible materials are not recommended.
- 0.15 layer height, my prototypes were printed with a 0.2 layer height with the final iteration printed with 0.15. This results in a smoother thread.
- 2-4 perimeters, my prototypes were printed with 2
- Infill is up to you, I'd recommend at least 15% and there's no real reason to go higher than 50%.