3D-Printed R2-D2 Data Panel Servo Mount System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Servo mount System for the Version 2 Mr. Baddeley 3-D printed R2-D2. I use a brass rod with file-flattened…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 45
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Servo mount System for the Version 2 Mr. Baddeley 3-D printed R2-D2. I use a brass rod with file-flattened ends. This Rod passes through a copper tube that acts as a nice bearing.
If you need to replace the servo, or you have already built the droid and want to add the servo, see this project https://www.thingiverse.com/thing:3292846.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Resolution:
.2
Infill:
4 perimeters/10%
Notes:
Print slowly because the details are very small. I printed the lower door arm and servo arm pieces on their sides.
Category: Model Robots