1 / 1
Leupold scope throw lever
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
scope throw lever for Leupold Rifleman 3-9x40 designed to fit over a 36.2mm adjuster. I used a M3x8mm bolt, but you…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 80
- Makes
- 0
- Views
- 718
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
scope throw lever for Leupold Rifleman 3-9x40 designed to fit over a 36.2mm adjuster.
I used a M3x8mm bolt, but you could probably use a 5mm
I added two M3 washers in the gap to prevent over tightening the ring
two edges would not take a fillet in Fusion 360.
This is my first item successfully designed and printed
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: eSun PLA + red
Notes:
Print flat on bed
I used tree supports, probably not necessaryCategory: Sport & Outdoors