1 / 1
Flite Prop Drill Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guide to drill out the flite board prop to 12mm to accept a 65161 motor shaft
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 129
- Makes
- 0
- Views
- 849
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Use this to enable aligned drilling of the Flite board prop to 12mm, the guide should clip over the prop and maintain the drill bit alignment. Mark the bit depth at 110mm. The 6 holes on the side of the cone are for optional hot glue to secure it in place whilst drilling. I found they were unnecessary. Wear a glove while drilling, and predrill the print before securing to the prop.
1/8/24 Added a step file of the original dimension and 2x 3mf files of larger tolerance options.