1 / 5
Gurtwickler Blende / Shutter Belt Winder Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Diese Gurtwickler-Blenden sind an vielen handelsüblichen Wicklern einsetzbar. Lochabstand 135/160/180/215 mm
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 210
- Makes
- 6
- Views
- 702
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Diese Gurtwickler-Blenden sind an vielen handelsüblichen Wicklern einsetzbar.
Lochabstand 135/160/180/215 mm
Gedruckt aus PETG, PLA sollte auch problemlos funktionieren.
Materialbedarf ca. 17 -25g je nach Größe
Druckzeit ca. 1 bis 1,5h
These belt winder covers can be used on many commercially available winders.
Hole spacing 135/160/180/215 mm
Printed from PETG, PLA should work just fine too.
Material required: approx. 17 - 25g depending on size
Printing time approx. 1 to 1.5 hours