Doll House Kitchen Sink 1:12
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Main part of any kitchen! The Sink!
- Rating
- 5 / 5
- Likes
- 340
- Downloads
- 906
- Makes
- 2
- Views
- 4,089
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
A full kitchen furniture set can be purchased on Etsy: https://etsy.me/3RIjFII
Print recommendations:
body.stl - print on its back
pipe.stl - print white
siphon.stl - print white on its top
tap_nut.stl - print twice(!)
door_left.stl & door_right.stl - print same color as body.stl
tabletop.stl - print other color then body
tap_washer.stl - any color
handle.stl - print twice - different color then doors
sink.stl - printed on its bottom - no supports
tap.stl - printed on its top - no supports
tap_handle.stl - printed on its top - no supports - same colour as tap.stl
Assembly instructions:
Use super glue to assemble parts
Use filament to glue it into the tap handle.
After screwing both nuts, glue bottom washer.
This is provide rotation to both - tap and its handle.
Nuts allow to tighten this rotation. After nuts are aggusted, they can ne fixed with a tip of superglue (do not too liquid glue, as it will glue all of the tap togather)
sink assembly.png - note that this picture does not show second nut that should be used to fix the upper nut, so tap would rotate
sink inner.png - siphon assembly
If you will print this model, please post a make. Thanks!