1 / 3
Lithopane Frame 150x90mm - WS2812B
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple and small Lithopane frame for 150x90mm prints
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Easy to print, i recommend using supports as manual and selecting the small interior flat spot and using Organic supports
Materials:
- x12 3x2mm magnets (so you can swap pictures at ease
- WS2812B Addressable LED (132mm)
- USB WS2812B power cable
- x2 M2x3 self tapping screws
- WS2812B Splitter (to connect a strip without an end piece) or you can solder
Printing:
- 3-4 walls of a dark material like black
- Organic supports for the interior overhangs
Hints and tips:
- lightly insert magnets then if using PLA turn your bed to 100c and place on top to heat them up a little then press the base onto a hard surface to sink them in easier
- Slider has a rough tolerance of 0.25mm for a tighter and cleaner fit
- Dollar Store LED is available in Canada and is 75x46mm /w 8mm rounded corners
- Supports are included in the Slider versions for the slide sections and Organic are recommended for the interior flat pieces
Revisions:
Sept 16
- Added a slider version and updated the magnet tolerances for better fit