Portable hex wrench case for bikers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hex wrench case especially for bikers
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
I usually carry some tools (hex wrenches and screwdriver) when I ride a bike, but I don't like big all-in-one wrench set since they are somewhat big and weight more than a simple hex wrenches. However, holding 4~6 wrenches in a bag or pocket individually is not convenience, so I made it to hold them simple and light.
It can keep hex wrenches of 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm. The size of the case is just 10x60x105mm and the weight is about 25g.
Post-Printing
Assemble
A 2mm hinge pin is required to assemble the base and the lid. A piece of filament is very well fit, so you need to cut a filament piece 105+ mm long and put it into the hinge hole. (picture #4) You may need to cut the end of them sharp in both direction, or just iron the ends of the pin with the case body.
Category: Tool Holders & Boxes