Teleprompter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Just a simple teleprompter that can be printed on an Ender 3v2 or other printer with a print bed at least 210 mm x 210 mm. I used Speedy777's design as a jumping off point. The arms fit a Samsung Galaxy Tab. A YouTube video showing how to put it all together can be found at https://youtu.be/H955T42xZpw.
In addition to the filament, you'll need:
16 - m 3.5 x 25mm bolts
16 - m5, 8mm nuts
1 - 1/4" x 20 winged nut and washer
1 - 8" x 10" 2mm thick picture frame glass
2 - small binder clips
piece of heavy black cloth
The only parts that need supports to print are the camera base, frame_3, frame_4, top_1, and top_3
If you've got a bigger print bed, you can use the files called Big Bed, which will have the top and sides as large, single pieces.